At 16:00 (JST) on December 23, 2025, we released updates for both ZENAIM SOFTWARE and the ZENAIM ARCADE CONTROLLER BUTTON MODULE KIT firmware. Please see the details below.
Update Details
- ZENAIM SOFTWARE Ver. 1.7.2
・Firmware update for ZENAIM ARCADE CONTROLLER BUTTON MODULE KIT - ZENAIM ARCADE CONTROLLER BUTTON MODULE KIT Firmware Ver. 1.3.1
・Improved the behavior of the SOCD Cleaner function.
Download the Latest ZENAIM SOFTWARE
Please download the latest version of ZENAIM SOFTWARE from the link below and perform the update:
https://zenaim.com/en/pages/software-license-agreement
Update Details
ZENAIM ARCADE CONTROLLER BUTTON MODULE KIT Firmware Ver. 1.3.1
SOCD Cleaner: Fixed an issue where certain input sequences could result in an unintended neutral state while the SOCD Cleaner was active.
Firmware Update Procedure
(Target: ZENAIM ARCADE CONTROLLER BUTTON MODULE KIT)
1. Launch ZENAIM SOFTWARE, then connect the controller via USB while holding both the HOME and START buttons.
2. After connecting, release the HOME and START buttons. The device will be recognized and the firmware update screen will appear.
3. Click “Update” to begin the firmware update.
・Do not disconnect the USB cable until the update is complete.
4. If you selected “Later,” you can proceed with the update from “Device Settings.”
Starting from Firmware version 1.3.0 or later, it is no longer necessary to hold HOME + START when connecting via USB.
Simply connecting the USB cable will allow seamless switching between ZENAIM SOFTWARE and games.
Please note that some products may not be available in certain regions.
